Noviomagus Femoral Head Reamer Set - Spierings
The Noviomagus Femoral Head Reamer Set has been developed to fixate bone parts, remove cartilage and subchrondal bone from the femoral head in a safe, easy and efficient way. Literature suggests that cartilage and sclerotic bone material does not osseointegrate and thus removal is necessary. The inverted reamers are designed to fit standard power tools. The bone vice can easily be assembled and disassembled which is ideal for cleaning and sterilization and it has a low centre of gravity, making it a stable device. When using the inverted reamers in combination with a power tool, the splash shield prevents the spread of the removed tissue. The slot in the bone vice makes it easy to cut the bone or split a femoral head in two halves, so it can instantaneously be milled in the Noviomagus Bone Mill.
- Strong and solid fixation of bone material
- Tissue removal in less than 30 seconds
- Less risk in personal harm or glove tearsLong lifespan without wear
- Preparation for high quality bone chips
Strong and solid fixation of bone material
The bone vice firmly holds the bone material, which diminishes the risk of miscutting or dropping the bone. The bone is held tightly by two fixed clamps on the bone vice and the detachable clamp. A slot on the bone vice makes it possible to cut or split the bone without damaging the vice. When a femoral head is used, half of a femoral fits in the funnel of the Noviomagus Bone Mill.
Reaming takes less than 30 seconds
By using the inverted reamers, the cartilage and sclerotic bone can easily be removed from the femoral head. Removing cartilage and sclerotic bone with this device is much more efficient and saves time compared to manual removal. By attaching the inverted reamers to a power tool, it takes less than 30 seconds. The inverted reamers are equipped with an AO or Zimmer-Stryker-Hall coupling. With the wide range of reamers sizes, all sizes of femoral heads can easily be reamed.
Less risk of personal harm or glove tears
Manual removal with a scalpel or grater whilst holding bone material in your hand is a potential hazard during surgery. There is a risk of dropping the bone material or cutting through the gloves. By fixating the material in the bone vice and using the inverted reamers, this potential hazard is eliminated.
Long life span without wear
The Noviomagus inverted reamers are made of a hardened stainless steel alloy and therefore guarantee a long life span without wear. We offer a standard 3 years warranty on all items of the Noviomagus Femoral Head Reamer Set. This warranty is not limited: it includes the specially hardened inverted reamers as well as the bone vice.
Highest quality bone chips
The Noviomagus Femoral Head Reamer Set has been developed to remove cartilage and sclerotic bone from the femoral head before milling it with the Noviomagus Bone Mill. Research has shown that cartilage and sclerotic bone parts do not osseointegrate with the host bone, This can negatively influence the stability of an implant¹. To reconstruct a stable bone bed it is necessary to remove the cartilage and sclerotic bone.
The Noviomagus Femoral Head Reamer Set is developed and manufactured by Spierings Orthopaedics BV, Nijmegen, the Netherlands. The Noviomagus Femoral Head Reamer Set consists of the following parts:
Sterilisation Tray (NFHRS)SBM-1109-45
Standard Operating Kit Noviomagus Femoral Head Reamer Set
|At least one Inverted Reamer selected below||SBM-XXXX-XX|
The Inverted Reamers for the Noviomagus Femoral Head Reamer Set are available with a standard AO-Coupling as well as the Zimmer-Stryker-Jacobs Hall-Coupling. The sterilization tray can hold up to 10 inverted reamers.
|Inverted Reamers with AO Coupling||Inverted Reamers with Z-S-J Coupling|
|Article||Article Number||Article||Article Number|
|Inverted||Reamer AO ø42||SBM-0503-18||Inverted||Reamer Z-S-J Hall ø42||SBM-1207-50|
|Inverted||Reamer AO ø44||SBM-0904-21||Inverted||Reamer Z-S-J Hall ø44||SBM-1207-51|
|Inverted||Reamer AO ø46||SBM-0904-22||Inverted||Reamer Z-S-J Hall ø46||SBM-1207-52|
|Inverted||Reamer AO ø48||SBM-0503-19||Inverted||Reamer Z-S-J Hall ø48||SBM-1207-53|
|Inverted||Reamer AO ø50||SBM-0904-23||Inverted||Reamer Z-S-J Hall ø50||SBM-1207-54|
|Inverted||Reamer AO ø52||SBM-0904-24||Inverted||Reamer Z-S-J Hall ø52||SBM-1207-55|
|Inverted||Reamer AO ø54||SBM-0503-20||Inverted||Reamer Z-S-J Hall ø54||SBM-1207-56|
|Inverted||Reamer AO ø56||SBM-0904-25||Inverted||Reamer Z-S-J Hall ø56||SBM-1207-57|
|Inverted||Reamer AO ø58||SBM-0904-26||Inverted||Reamer Z-S-J Hall ø58||SBM-1207-58|
Our account managers and distributors are available to advise the best solution and reamer selection based on your specific needs. Feel free to reach out to us using the contact form. In case you are looking for orthopedic instruments for surgical use, please visit www.spierings.biz
← Noviomagus Femoral Head Reamer Set
Noviomagus Femoral Head Reamer Set
The Noviomagus Femoral Head Reamer Set and the inverted reamers are made of solid surgical stainless steel, hardened where necessary.
We offer a two year warranty on all parts, including the inverted reamers, for use in tissue banks.
We have customers throughout the world that have been using the Noviomagus Femoral Head Reamer Set for many years. Amongst them we can mention the University Medical Centre of Nijmegen (the Netherlands), the Royal Exeter Hospital (UK), Biobank (France), Royal Adelaide Hospital (Australia), Charité Hospital (Germany), Rigshospitalet (Denmark) and many other bone banks and hospitals.
The base plate can be used for the fixation of different types of bone material. The inverted reamers can be used for debriding sphere-like surfaces, such as femoral heads or humeral heads.